J. P. Metals

J. P. Metals

J. P. Metals

Kamathipura, Mumbai, Maharashtra

Round Bars

Offering you a complete choice of products which include nitronic 50 round bars, nitronic 60 round bars, 15-5 stainless steel round bars and 17-4 ph stainless steel round bars.

Nitronic 50 Round Bars

REQUEST CALLBACK

Get Best Quote

Approx. Rs 2,850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Usage/ApplicationALL TYPES
Material GradeSTAINLESS STEEL
BrandJP METALS
Payment Terms50% ADVANCE PAYMENT
Test CertificateYES
Third Party Inspection TipYES

Austenitic Stainless

NITRONIC 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature. In addition, Armco NITRONIC 50 Stainless has very good mechanical properties at both elevated and sub-zero temperatures. And, unlike many austenitic stainless steels, NITRONIC 50 does not become magnetic when cold worked.

Applications

  • Superior corrosion resistance
  • Almost double the yield strength
  • Exceptionally low magnetic permeability
  • Outstanding cryogenic properties
  • Outstanding corrosion resistance gives Armco's NITRONIC 50 Stainless Steel the leading edge for applications where Types 316. 316L, 317 and 317L are only marginal. It's an effective alloy for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries.
  • Components using the combination of excellent corrosion resistance and high strength currently include pumps, valves and fittings, fasteners, cables, chains, screens and wire cloth, marine hardware, boat and pump shafting, heat exchanger parts, springs and photographic equipment.
  • Fastener - High strength, and higher strength fasteners can improve the durability of you equipment
  • Marine hardware - Mastings, tie downs
  • Marine and Pump shafts - better corrosion than types 304 and 316, with double the yield strength.
  • Valves and fittings - better corrosion than types 304 and 316, with double the yield strength.
  • Downhole rigging - better corrosion than types 304, 316 and 17-4, with double the yield strength in annealed condition.
  • Reduced cross sections - better corrosion than types 304, 316 and 17-4

 

Chemistry

  • Chemical Requirements

     

    Ni

    Cr

    Mo

    Mn

    C

    Si

    Fe

    Max

    13.5

    23.5

    3.00

    6.0

    0.06

    1.00

    Bal

    Min

    11.5

    20.5

    1.50

    4.0

     

     

     

 

Tensile Data

  • Mechanical Property Requirements

     

    Ultimate Tensile

    Yield Strength (0.2% OS)

    Elong.

    R/A

    Hardness

    Min

    100 KSi

    55 KSi

    35%

    55%

     

    Max

     

     

     

     

    293

    Min

    690 MPa

    380 MPa

     

     

     

    Max

     

     

     

     

     

 


Yes! I am interested

Nitronic 60 Round Bars

REQUEST CALLBACK

Get Best Quote

Approx. Rs 1,250 / KilogramGet Latest Price

Product Details:

Single Piece Length6 meter
MaterialStainless Steel Grades
SizeAll Sizes
Material Grade304/316/304L/316L
BrandJp Metals
Usage/ApplicationConstruction
Thickness/DiameterALL SIZES

Austenitic Stainless

Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. This grade is best known for its wear and galling resistance.

The additions of Silicon and Manganese have given this alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working. This working does not enhance the anti-galling properties as is normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into the material is added strength and hardness, and the wear resistance does not decrease noticeably. Chromium and Nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. The high mechanical strength in annealed parts permits use of reduced cross sections for weight, and cost reductions through the use of thinner stock.


Chemistry

Chemical Requirements

 

Ni

Cr

Mn

Si

N

Mo

C

Max

9.00

18.00

9.00

4.5

0.018

0.75

0.10

Min

8.00

16.00

7.00

3.5

0.08

 

 

 

Tensile Data

Mechanical Property Requirements under 0.5"

 

Ultimate Tensile

Yield Strength (0.2% OS)

Elong. in 4D

R/A

Hardness

Min

105 KSi

55 KSi

35%

55%

 

Max

 

 

 

 

 

Min

724 MPa

379 MPa

 

 

 

Max

 

 

 

 

 

 


There are other high strength properties available for sizes of bar, wire, sheet and plate. Inquire with a sales associate at High Performance Alloys for more information. See bulletin, or brochure on the material (above) for a quick overview.


 

 

 


Yes! I am interested

15-5 Stainless Steel Round Bars

REQUEST CALLBACK

Get Best Quote

Approx. Rs 150 / KilogramGet Latest Price

Product Details:

Thickness/DiameterADVANCE
Usage/ApplicationALL TYPES
Single Piece LengthALL SIZE
Material GradeSS304/SS316
GradeZE
ShapeRound
BrandJP METALS
Payment Terms50%
Test CertificateYES

Stainless Steel 15-5 is a precipitation hardening martensitic stainless steel. It is used in applications requiring better corrosion resistance and transverse properties compared to other similar martensitic grades. Strength and toughness desired can be altered by temperate range in the heat treatment process.

15-5 ph Stainless Steel Mechanical Properties
Material TypeConditionUltimate Tensile
Strength (PSI)
0.2% Yield
Strength (PSI)
Elongation
(% in 2in.)
Reduction Of
Area (%)
Hardness
Brinell
Hardness
Rockwell
15-5 PHH900190,000170,000615388C40
H1025155,000125,000827331C35
H1075145,000125,000928311C32
H1150135,000105,0001130277C28
H1150-M115,00075,0001435255

CHEMICAL COMPOSITION :

  • Carbon 0.070 Max
  • Chromium 14.0-15.50
  • Columbian Tantalum 0.15-0.45
  • Copper 2.50-4.50
  • Manganese 1.00 Max
  • Nickel 3.50-5.50
  • Phosphorus 0.040 Max
  • Silicon 1.00 Max
  • Sulfur 0.30 Max
STANDARDS :

  • UNS S15500
  • AMS 5659
  • ASTM A564
APPLICATIONS :

  • Valves
  • Aircraft Parts
  • Gears
  • Pump Parts

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Yes! I am interested

Save time! Get the Best Deal

*Your information is safe with us.

17-4 Ph Stainless Steel Round Bars

REQUEST CALLBACK

Get Best Quote

Approx. Rs 250 / KilogramGet Latest Price

17-4 PH Stainless Steel is a precipitation hardening martensitic stainless steel. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Strength and toughness desired can be manipulated by temperate range in the heat treatment process.

Below you will find typical applications of 17-4 PH stainless steel as well as the metals composition and mechanical properties. Learn more about or value added services that we offer to help you expedite the current job you have at hand.

Best Stainless offers high quality standards including: UNS S17400, AMS 5643, ASTM A564, and ASTM A693 Grade 630.

17-4 PH stainless steel can be used for a variety of applications including: pump shafts, oil path, mechanical seals, and within the aerospace industry. Its composition is carbon, chromium, columbian tantalum, copper, manganese, nickel, phosphorous, silicon, and sulfur.

Properties
Material TypeConditionUltimate Tensile
Strength (PSI)
0.2% Yield
Strength (PSI)
Elongation
(% in 2in.)
Reduction Of
Area (%)
Hardness
Brinell
Hardness
Rockwell
17-4 PHH900190,000170,0001040388C40
H1025155,000145,0001245331C35
H1075145,000125,0001345311C32
H1150135,000105,0001650277C28
H1150-M115,00075,0001855255C24
H1150-D125,000105,0001650255 min-
311 max
C24-33
CHEMICAL :

  • Carbon 0.070 max
  • Chromium 15.00 - 17.50
  • Columbian Tantalum 0.15 - 0.45
  • Copper 3.00 - 5.00
  • Manganese1.00 max
  • Nickel 3.00 - 5.00
  • Phosphorus 0.040 maxa
  • Silicon 1.00 max
  • Sulfur 0.030 max

STANDARDS :
  • UNS S17400
  • AMS 5643
  • ASTM A564
  • ASTM A693 Grade 630
  • NACE MR0175/MR0103 (H-1150D Condition)
APPLICATION :
  • Pump Shafts
  • Oil Patch
  • Mechanical Seals
  • Aerospace

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Yes! I am interested

X
 





Explore More Products